We design a manufacture a large range of commercial trailers, capable of carrying payloads from 100 kgs to 50,000 kgs. Our range of trailers includes Platform Trailers typically used to transport goods and equipment. Box, Curtain Sided, Cage and Tank Trailers that protect your cargo from the elements or enables transportation. Well Stepped or V Deck Trailers a solution to safely transport any load around the workplace. Hydraulic Elevating Trailers ideal for large payloads. Specialist Process Trailers for transporting loads of any size as well as Axle Assemblies and Spares.
Platform Trailers
Common place within all types of industry these trailers are used to transport goods and equipment around the workplace environment both internally and externally.
They can be towed singly or in multiple and with removable drawbars they can be towed from either end. Dependant on size these trailers can be manoeuvred manually with the use of a T handle or increasing in size they can be towed behind forklift trucks (which are used to load and unload) or behind specifically designed battery or diesel powered tow tractors.
Durable and easy to maintain these trailer have many varied uses within all working environments.
 |
Model No. IP40ST
Extending platform trailer with deck specifically designed to carry gas bottles, with pneumatic tyres and suspension for a smooth and secure ride. |
 |
Model No. IP2ST
Small platform trailer specifically designed for limited access on gantry platforms aboard oil rigs, with lifting lugs for movement between platforms. |
 |
|
|
|
 |
Standard Platform
Standard platform trailers with keruing half lap hardwood decking for heavy industrial use.
|
 |
Model No. IP200TT
With a payload of 2,000 kgs this platform trailer has been design to work in Zone 2 compliance areas. Anti static tyres, Rubber protected perimeters and brass fittings allow this trailer to be used in spark proof environments |
|
|
|
|
 |
Model No. IP30TT
With a payload of 20,000 kgs this platform trailer has been designed with guides to transport crucibles of hot molten aluminium. |
 |
Nissan Engine Trailer
Nissan Washington plant is a model of working efficiency in practice. Moving engines power units) between assembly lines is vital to keeping targets. We designed and built trailers to handle up to 10 engines at a time |
| |
|
|
|
 - |
Model No. IP50TT
Twin turntable platform trailers with a 5,000kgs load capacity, platform dimensions of 4000mm x 1200mm, keruing hardwood decking and a 30mm towing eye with T handle are used to transport pumps through the production line. |
| |
|
|
|
|
Box, Curtain Sided, Cage and Tank Trailers
Weather it’s to protect your cargo from the elements or to enable it transportation, hydraulic or manual loading, self manoeuvre or towing vehicle these trailers
are specifically designed to each individual’s need.
Common place in many public and private sector sites these trailers are utilised for:-
- Food trolley / wheelie bin transportation
- Baggage collection
- Transportation of solid or liquid materials
- General waste collection
 |
Model No. IP200TT –
Capacity 20,000 kgs
Manufactured to carry steel coils, specifically designed trailer for use with overhead cranes, the curtain cover is on rollers and hoops to facilitate the loading and to protect load during transit. |
 |
Model No. IP50TT –
Box Van Trailer
1 of 3 purpose built trailers for transporting large quantities of stationary / equipment around a large government site. |
|
|
|
|
 |
Model No. IP10ST & IP20ST – Luggage Trailers
These trailers were design specifically for the needs of each of the operators to best facilitate the movement of the baggage around the airport and runway. |
 |
Model No. IP100ST –
Tank Trailer
Specifically designed for British Aerospace to move aviation kerosene around the site.
|
|
|
|
|
 |
Model No. IP20ST
4 of 12 manufactured for Caterpillar these curtain side trailers are used to deliver parts to the production line. |
 |
Model No. IP15ST – Food
Trolley Transporters
Designed with a hydraulic
tail lift or rear tailgate, these box trailers transport upto 8 food trolleys at a time around a large HMP site.
|
| |
|
|
|
 |
Model No. IP10TT
Twin turntable swan neck trailer with twin tail ramps to each side, design for low entry height. |
|
|
| |
|
|
|
|
Well Stepped or V Deck Trailers
Utilising our design experience we can develop a solution to safely transport any load around the workplace, the trailer decks are designed and manufactured to secure the most awkward of loads. With the well deck trailer it is possible to achieve most deck heights which would enable larger load (height) transportation with a low centre of gravity and a low loading height.
Specifications to suit all applications...
 |
|
Alexander Industrial V Deck Trailer - Model No. IP5TA ( Twin Ackerman )
This trailer was required to carry a uniquely shaped 5,000 kg payload within an industrial chemical production plant, the V deck design and twin Ackerman steering allows the load to be safely transported around the plant with the minimum of effort. |
|
|
|
|
|
 |
Model No. IP80TT
At over 1,000 kgs each, this trailer was manufactured to carry 5 molten metal boats around the foundry floor, the twin turntable design ensures the manoeuvrability and stability of the payload. |
 |
Plant Trailer
Swan-neck trailer used for transporting fork lifts on a large industrial site |
|
|
|
|
 |
Trolley Transporter
With it’s low ground clearance this trailer is purpose built to transport industrial trolleys round the shop floor |
| |
|
|
Hydraulic Elevating Trailers
These trailers are designed to lift and transport large payloads around the production site. The hydraulic platforms can be designed and manufactured to any size to accommodate most loads, lifting capacity varies on size and height to be lifted, for further information please contact us.
|
Trolley Transporter
With it’s low ground clearance this trailer is purpose built to transport industrial trolleys round the shop floor |
 |
Kvaerner
One of the largest trailers we have produced to date. This custom made trailer can handle up to 12m, 34 tonnes at a time.
Special hydraulics allow loads to be raised and lowered by up to 200mm |
|
|
|
|
 |
|
Model No. IP50EP
(Elevating Platform)
With a 5 tonne lifting capacity this trailer was designed with an elevating platform, the flat bed would move under the palletised load and then elevate by up to a 150mm to allow the load to be safely and effortlessly moved around the factory floor. |
|
|
|
|
|
|
Specialist Process Trailers
What ever the size, shape or capacity a trailer can be designed and manufactured to transport the load securely and safely.
Each company’s requirements are different, our site survey will identify these needs and through our design and manufacturing process a solution can be provided, which ultimately will improve the working efficiency of any process.
 |
Model No. IP100SA
(Single Ackerman)
This trailer was designed to transport bag filters for a chemical plant. |
 |
Komatsu Dump Truck
Komatsu build some of the world’s largest dumper trucks.
Moving the tipper section weighting 21 tonne into Komatsu’s paint shop could have been a problem but, as usual, our designers had the answer.
This trailer supports it’s load perfectly, allowing for easy transfer into the factory. |
|
|
|
|
 |
Model No.IP120CS
(Castor Steered)
1 of 9 this trailer was designed and manufactured for Caterpillar
to carry 12 tonne telescopic booms along the production line. |
 |
Model No. IP10TA
(Twin Ackerman)
To meet the demands of Nissan’s production, this trailer was specifically designed to deliver palletised axles to the assembly line. |
|
|
|
|
 |
Model No. IP20CS
(Castor Steer)
Manufactured for Goodyear this trailer was designed with a low ground clearance to allow tyre reinforcement to be ‘rolled on &
off’ for transportation. |
 |
Model No. IP20BP
(Battery Powered)
Manufactured for the UK Paper Company for handling calendar rolls, battery powered it has a 2 tonne payload. |
| |
|
|
|
 |
Model No. IP30TA (Twin Ackerman)
This trailer was manufactured to transport visitors on tours around a large industrial plant. |
|
|
|
|
|
|
Axle Assemblies
 |
|
Model No. IP100ST – Axle Sets
These axle sets have been design and manufactured to the clients specification which are to be fitted a mobile bag filling stations. |
|
|
|
|
|
|
Manufacture and Spares
 For prices or further information relating to these, or any of our products, then please fill in our enquiry form here
|
